Here below you can search latest news regarding Board / Universities / Entrance exams in CHANDIGARH.
CHANDIGARH State – Boards
Chhatisgarh Board of Secondary Education, Raipur
CHANDIGARH State – Universities
Regional Institute of English
Here below you can search latest news regarding Board / Universities / Entrance exams in CHANDIGARH.
Chhatisgarh Board of Secondary Education, Raipur
Regional Institute of English
University of Kashmir shortly issued the Biannual Degree Fazila courses B.A/ B.SC/ B.Com/ BBA/ BCA/ MCMP/ Fazila/ B.A English Honours/B.Com Honours BG II Year Examinations to be held in Oct, 2016 Date Sheet Notification and admit card for their students. University of Kashmir will be conduct the UG Fazila exams for eligible backlog/ Additional/ Division improvement Candidates of Kashmir and Ladakh Divisions students. All the related candidates who have to appear for the above Undergraduate Fazila Course Regular/ Supplementary Exams October 2016, you are suggested to download the exam schedule and admit card also through online.
According to the last year (in 2015 year) Biannual Degree Fazila Exams Oct 2015 official time table notification, the bachelor degree examinations was successfully conducted by the University of Kashmir from (Oct 2016) (Monday) 12th October 2015 to (Friday) 23rd October 2015 at respective exam centres for their students. Now this is time to issue the 2016 year time table / exam schedule by the university. The related candidates you are at correct place to check the exam schedule and information regarding admit card through this article. Further details read below.
Name of University: University of Kashmir, Srinagar, Jammu and Kashmir
Announcement: Exam Schedule & Admit Card
Name of course: Bachelor Degree Reg/Improve/Backlog Exams October 2016
Date of commencement of UG Exams: Monday, 12-10-2015 (2016 year date update soon)
Date of end of the Degree Exams: Friday, 23-10-2015 (2016 year date update soon)
Timing for the exam: 2 pm except Friday 2.30 pm
Admit card status: Update soon
Examination center : Centre Notice will be issued separately
University website: www.kashmiruniversity.net
Note : Candidates shall download their Admit Cards from the University Website www.kashmiruniversity.net as and when centre notice is issued.
Kashmir University
UG Fazila Exams October 2016
Date sheet : http://egov.uok.edu.in/courseinfo/onlinedatesheets/prelogin/default.aspx?ch=1
University of Kashmir – Bachelor Degree II Year Exams October 2015 Date Sheet
Kashmir University Degree backlog/ Additional/ Division improvement Examination October 2015 Date sheet prepared and approved by the “(Manzoor Ahmad Wani) Assistant Controller of Examinations (Unit-I)” on 29th September 2015. The UG Exams schedule notification “No: F- (Date sheet II Year Biannual)/KU/2015” was recently published by the Kashmir University for their students who are going to appear for the exams. All the related candidates are check their exam schedule to preparing for course wise to your exams. Candidates must carry valid Identity Cards and Admit Cards with them on each day of examination for identification by the supervisory staff.
Time Table for UG II Year Exams Held in October 2015
Timing : 02.00 p.m. except Friday 02.30 p.m.
Day & Date | Science/Home Science |
Arts/Social Science /Fazila / B.A Honours |
Monday, 12-10-2015 |
Bio-Chemistry Bio-Technology Geography Electronics H.SC-Human Development |
Psychology Kashmiri Geography Arabic Grammar & Composition(Fazila) Poetry-I(BAH-I) |
Tuesday, 13-10-2015 |
Math Zoology Fruit Preservation & Mushroom Cultivation Seed Technology H.Sc-Textile Clothing |
Math English Literature |
Wednesday 14-10-2015 |
General English | General English |
Thursday, 15-10-2015 |
Physics Food Science & Technology |
Sociology Sanskrit Persian |
Friday, 16-10-2015 |
Environmental Science | Environmental Science |
Saturday, 17-10-2015 |
Chemistry(Old/New) | Political Science |
Monday, 19-10-2015 |
H.Sc-Food & Nutrition Industrial Fish & Fisheries Botany (Old/New) |
Education Novel-I (BAH-III) Hadith & Jurisprudence (Fazila) |
Tuesday, 20-10-2015 |
Computer Applications Sericulture Industrial Chemistry Environmental & Water Mgt. Information Technology Electronics equipment & Maintenance |
Philosophy Tourism & Travel Mgt. Mass Communication & Video Production Functional English Computer Application Interpretations of Quran ( Fazila ) |
Wednesday, 21-10-2015 |
Statistics Geology H.Sc Community & Resource Mgt. |
Statistics Urdu Hindi Arabic Panjabi Drama ( BAH-II ) |
Thursday, 22-10-2015 |
Home Science Extension & Communication |
Economics Islamic Studies Indian Music Urdu/Kashmiri/Hindi/ Arabic/Persian (BAHIV) |
Friday, 23-10-2015 |
– | Applied Math Arabic Language & Literature ( Fazila ) History (Old/New) |
Schedule for B.Com/BBA/ B.Com Honours / BCA/MCMP Exams Oct 2015
Day & Date | B.Com/BBA/ B.Com Honours |
BCA/MCMP |
Monday, 12-10-2015 | Advanced Accounting-M(II) Organizational Behavior (BBA-201) Communicative English ( BCH-201 ) |
Business Communication (BCA-01) Video & TV Production (MCMP-07 ) |
Tuesday, 13-10-2015 | Human Resource Mgt. (BBA-202 ) Business Statistics (BCH-202 ) |
Computer Organization & Architecture (BCA-02) |
Wednesday 14-10-2015 | General English | General English |
Thursday, 15-10-2015 | Financial Mgt. (BBA-204) Auditing (BCH-204) |
Data Structures (BCA-03 ) |
Friday, 16-10-2015 | Environmental Science | Environmental Science |
Saturday, 17-10-2015 | Business Taxation (BBA-206) Income tax law & Practice (BCH-206) |
System Analysis Design & Implementation (BCA-05) |
Monday, 19-10-2015 | Computer Applications-II (BBA-207) Public Finance (BCH-209) |
Multimedia Design (MCMP-10) |
Tuesday, 20-10-2015 | Production Mgt. (BBA-205) Computer Applications in Business (BCH-205) Principles & Practice of Mgt. M (III) Value added tax (VAT- BCH-207) |
Advertising & Public Relations (MCMP-09 ) Data Base Management System (BCA-04) |
Wednesday, 21-10-2015 | Marketing (BBA-203 ) Entrepreneurship (BCH-203 ) Military Science (NCC) |
Online Journalism (MCMP-08 ) |
Thursday, 22-10-2015 | Computer Application & Business/Monetary Economics/Entrepreneurship Development/Human Resource Mgt. (M-IV) Cost Accounting (BCH-208) |
Object Oriented Programming Using C++ (BCA-06) |
Friday, 23-10-2015 | Banking Theory and Practice (BCH-2010) | … |
Admit card for bachelor Degree Part-II Exams October 2015 Download Online
Kashmir University already issued the exam scheme and admit card for UG IInd Year Exams October 2015. Now the UG Admit card available to download through university website. The related candidates who are going to appear for the above UG 2nd year Examination October 2015, you can follow the below instructions to downloading of UG Admit cards.
How to download the Admit card :
The above UG Second Year Admit card October 2015 Exams available now. Candidates must and should bring your admit card before going to exams and show your hall ticket at examination hall.
For any more enquiry on this topic leave a comment at below comment box
PULEET 2024 Application Form will be released on 1st May 2024. The Panjab University Lateral Engineering Entrance Test (PULEET) is a crucial examination facilitating admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. Designed for candidates holding diplomas in engineering or vocational studies, PULEET offers a direct pathway to pursue higher education in various engineering disciplines.
Each year, a significant number of aspirants participate in PULEET, reflecting the exam’s popularity and the growing demand for engineering education. With its comprehensive syllabus covering subjects like mathematics, physics, chemistry, and general aptitude, PULEET assesses candidates’ knowledge and aptitude in engineering fundamentals.
The rigorous examination process ensures that only the most deserving candidates secure admission, contributing to the reputation of Panjab University as a premier institution for engineering studies. PULEET serves as a vital platform for aspiring engineers to realize their academic aspirations and embark on a rewarding career path in the field of engineering.
PULEET 2024 Notification – Application Out Soon
PULEET, or the Panjab University Lateral Engineering Entrance Test, serves as a gateway for aspirants seeking admission into the second year of the Bachelor of Engineering (BE) degree program at Panjab University, Chandigarh. This entrance examination enables candidates with a diploma in engineering or vocational studies to directly enter the second year of the BE program across various engineering disciplines.
The BE program offered by Panjab University encompasses a diverse range of fields including Chemical Engineering, Food Technology, Computer Science Engineering, Information Technology, Electronics & Communication, Biotechnology, Electrical & Electronics, and Mechanical Engineering. PULEET is conducted annually by the university’s admission authority and provides candidates with an opportunity to pursue higher education and advance their career prospects in the field of engineering. With its comprehensive syllabus and rigorous examination process, PULEET ensures the selection of candidates based on their merit and aptitude for engineering studies.
Panjab University Lateral Engineering Entrance Test (PULEET) is an annual exam conducted in English and Hindi languages, featuring an offline mode, with a duration of 1 hour 40 minutes, comprising 100 multiple-choice questions, and charging an application fee of INR 2,395 for General category and INR 1,198 for SC/ST/PwD categories.
Particulars | Details |
Full Exam Name | Panjab University Lateral Engineering Entrance Test |
Short Exam Name | PULEET |
Frequency | Once in a year |
Languages | English, Hindi |
Mode of Application | Online |
Application Fee | General: INR 2,395 |
SC/ST/PwD: INR 1,198 | |
Mode of Exam | Offline |
Exam Duration | 1 hour 40 minutes |
Exam Marks | 100 Marks (Multiple Choice Questions) |
1 Mark is awarded for each correct answer | |
Negative Marking: ¼ marks will be deducted for wrong answers |
Stay updated with the important dates for PULEET 2024, including application deadlines, admit card release, exam date, and result declaration.
Event | Dates |
Starting Date of Application Form | 1st May 2024 |
Closing Date of Application Form | 4th June 2024 |
Admit Card Release | Last week of June 2024 |
Examination Date | 22nd June 2024 |
Result Declaration | Last week of August 2024 |
The PULEET 2024 application form is anticipated to be released in 1st May 2024 on the official website at puleet.puchd.ac.in. Candidates aspiring to secure admission to Panjab University, Chandigarh, must complete the application process by filling out the application form. The direct link to access the application form will also be provided on the official website once it is released. Candidates are advised not to submit the PULEET application form 2024 through email, fax, post, etc.
Candidates are required to pay the application fee to successfully submit the PULEET 2024 application form. The application fee for different categories is as follows:
Category | Application Fee |
General | INR 2395/- |
SC/ST/PwD | INR 1198/- |
To fill out the PULEET (Panjab University Lateral Entry Entrance Test) application form, candidates should follow these steps:
Candidates must adhere to the eligibility criteria to apply for the exam. The admission authority strictly enforces these criteria, and applications from non-eligible candidates will not be entertained. Here are the eligibility requirements for PULEET 2024:
Candidates appearing for the PULEET 2024 exam must familiarize themselves with its exam pattern to understand the marking scheme, question types, duration of the examination, and other relevant details.
Particulars | Details |
Medium of Exam | English only |
Duration of Exam | 1 hour 40 minutes |
Types of Questions | MCQ (Multiple Choice Questions) |
Mode of Exam | Offline |
Subjects | General Engineering, Physics, Chemistry, Mathematics, and General Aptitude & Communication Skills |
Total Questions | 100 |
Marking Scheme | 1 mark for each correct answer |
1/4 negative marking |
The syllabus for PULEET 2024 encompasses various subjects including basic electrical engineering, basic electronics, programming fundamentals, fundamentals of mechanical engineering, fundamentals of civil engineering, fundamentals of chemical engineering, physics, chemistry, mathematics, and general aptitude & communication skills.
Chapters | Topics |
Electric Machines | Operating principle and application of DC machine as generator and motor, EMF and Torque equations, methods of excitation. Operating principle and applications of 3 phase squirrel cage and slip ring induction motors, equivalent circuit and torque speed characteristics (qualitative treatment). Operating principle of single phase induction motor (split Phase and capacitor motors), torque-speed characteristics (qualitative treatment). Principle of operation and applications of variable reluctance, permanent magnet and hybrid stepper motors, speed torque characteristics (qualitative approach). |
Transformers | Introduction, Basic Principle, EMF equation, approximate equivalent circuit, phasor diagram, losses, efficiency and condition for maximum efficiency, voltage regulation, open circuit and short circuit tests. |
Magnetic Circuit | Introduction to magnetic circuit, magneto motive force and magnetic field strength, permeability of free space, relative permeability, reluctance, comparison of electric and magnetic circuits, B/H curve, magnetic circuits calculations, self and mutual inductance. |
Three Phase AC Fundamentals | Disadvantages of single phase system, three phase voltages and currents, voltages and currents in star and delta connected systems, power in a three phase system, solution of three phase balanced circuits, power and power factor measurement by two watt-meter method. |
Single Phase AC Fundamentals | Alternating current systems, waveform terms and definitions, average and r.m.s. values of alternating quantities, phasor notation, solution and phasor diagram of single phase ac circuits with sinusoidal source excitation. |
DC circuits | Voltage and current sources, Kirchhoff’s laws and network solution, network analysis by mesh and node analysis, superposition theorem, Thevenin’s theorem, Norton’s theorem, delta-star transformation and vice-versa, maximum- power transfer theorem, energy storage elements, step response of RL, RC and RLC circuits. |
Chapters | Topics |
Communication | Basic Concepts, Modulation, Need for modulation, introduction to AM, FM, PM. Test and measuring instruments, Block diagram, concept of digital electronic voltmeters, ammeter and wattmeter, CRO, Signal Generators, Sensors and Transducers and their classification. Working principle of resistive, capacitive, photosensitive and temperature transducers. Block diagram and working principle of analog and digital data acquisition system. |
Flip flops | Concept of flip-flops, RS, D, JK and T types, triggered and clocked, master slave, Shift Register, concept of synchronous and asynchronous counters. Half and full adder, subtractor, Seven Segment display, Concept of Mux, deMux, decoder and encoder. |
Boolean algebra and logic gates | Binary and Hexadecimal number system, BCD and weighted codes, Binary arithmetic, Logic-positive and negative logic, basic and universal logic gates. Boolean algebra and postulates, reduction of Boolean expression. |
Oscillators | Block Diagram of feedback circuit used as an oscillator, Barkhausen criterion, types of oscillators. |
Operational amplifiers | Block Diagram, Characteristics of an ideal OP-AMP, Application of OP-AMP as an Inverting amplifier, Phase Shifter, Scale Changer, Non-inverting amplifier, Adder or Summing amplifier, differential or difference amplifier, integrator. |
Chapters | Topics |
Introduction | Computer Basic, Block Diagram of Computer, Memory Hierarchy, Types of RAM, Secondary Memory Introduction to Operating Systems, Programming Languages, Program Structure, Linux Shell Commands, Bourne Shell, C Shell, Korn Shell. |
Basic Constructs of C | Keywords, Identifiers, Variables, Symbolic Constants, Data Types and their storage, Operands, Arithmetic Operators, Relational Operators, Logical Operators, Bitwise Operators, Increment & Decrement Operators, Expressions, Conditional Expressions, Assignment Operators and Expressions, Type Conversions, Precedence and Order of Evaluation, External Variables and Scope of Variables. Basic Input Output, Formatted I/O. |
Program Control Flow | Statements and Blocks, Conditional Statements, IF, ELSE-IF, Switch Case statements, Control Loops, For, While and Do-While, Go to and Labels. |
Arrays & Functions | Pointers and Addresses, Arrays, Multi-dimensional arrays, strings, pointer arrays, Functions, Function Prototyping, Scope of functions, Arguments, Call by value and call by references, static variables, recursion, C-Preprocessor and Macros, Command line arguments. |
Structures | Structures, Array of Structures, pointer to structures, Typedef, Unions, Bit fields, passing structures as an argument to functions |
Input and Output | Standard and Formatted Input and Output, File Access & its types, Line Input and Output, Types of Files, Binary & ASCII Files, Error handling, stderr and Exit functions |
Chapters | Topics |
Bending and Torsion | – Stress in beams due to bending, proof of formulae M/I = f/y = E/R and its application to beams of rectangular and circular section. – Application of torsion equation to hollow and solid circular shaft |
Bending moment (B.M.) and Shear force (S.F.) | – Diagrams for cantilevers, simply supported beams with or without overhang and calculation of maximum B.M. and S.F. and the point of contra flexure under the following loads. – Concentrated loads, Uniformly distributed loads over the whole span or part of span, combination of concentrated loads (two or three) and uniformly distributed loads. |
Simple Stress and Strains | – Concept of stress and strain. – Stress and strains in bars subjected to tension and compression, stress-strain diagrams, mechanical properties, factor of safety, Extension of Uniform bar under its own weight, stress produced in compound bars (two or three) due to axial loads. |
Flow Measurement | – Pilot tube, Venturimeter, Orificemeter, Notches (Rectangular & Triangular) and weirs, Rotameter. |
Fluid Dynamics | – Equation of continuity, Euler’s Equation, Bernoulli’s equation, simple applications to one-dimensional flow problems. |
Kinematics Of Fluid Flow | – Types of flow, acceleration in fluid flow, streamlines, stream tubes, irrotational flow, stream function, velocity potential, flow nets. |
Power Cycles | – Carnot and Rankine steam power cycles. – Effect of mean temperature of heat addition on Ranking cycle efficiency. – Otto, Diesel, and Dual combustion cycles for reciprocating I.C. engines. |
Steam and Its Formation | – P-V, P-T, T-S, H-S diagrams of water. – Dryness fraction and its measurement by calorimeter. – Uses of steam tables and Mollier chart (H-S chart). |
Laws of Thermodynamics | – First law of thermodynamics, Steady flow energy equation and its applications (nozzle, throttling device, turbine, compressor, heat exchanger). – Limitations of the first law, statements of the second law by Max-Planck and Clausius, equivalence between the two statements. – Reversible and irreversible processes, Carnot’s theorem. – Energy analysis of a heat engine, refrigerator, and heat pump. |
Chapters | Topics |
Estimation and Costing | – Estimation and Types of estimation – Analysis of Rates – Irrigation Work Estimation – Road Work Estimation and Valuation |
Soil Mechanics | – Physical Properties of soil and Soil classification – Water flow through soil and Soil Deformation – Strength Characteristics of soil and soil Compaction – Bearing Capacity and Site Exploration |
Transportation Engineering | – Road Geometrics – Highway Surveying – Road Material and Pavement – Road Drainage and Maintenance |
Irrigation Engineering | – Rainfall and Run off – Crops water requirement – Irrigation and types of irrigation – Canal Works – Water logging and Drainage – Dams |
Surveying | – Chain & Compass Surveying – Leveling using Dumping and IOP Level |
Steel Structure | – Structural Steel Section and Connections – Tension, Compression, and Beam Members |
Reinforced Concrete Structures | – Reinforcement – Theory of RCC Beams – Bonds in RCC Beams – Singly & Doubly RCC Beams – RCC Slabs – Reinforced Brick Works and Columns |
Concrete and Structures | – Concrete and Properties of Concrete – Formwork, ordinary and special concrete – Concrete Operation – Stress & strain, Bending Moment & Shear Force – Slope and Deflection – Columns and trusses |
Hydraulics | – Fluids and Properties of fluids – Hydrostatic Pressure – fluid flow and measurement through pipe and open channel |
Construction Material and Building Construction | – Rock, Bricks & Tiles – Cement, Lime Timber and paints – Excavation of foundation – Brick Masonry – Stone Masonry – Wall, Mortar & Concrete – Damp-proofing – Doors-windows – Roof, Floors, Stairs, and Building planning |
Chapters | Topics |
Introduction to Engineering Calculations | – Units and dimensions – Conversion of units – Systems of units – Dimensional homogeneity and dimensionless quantities – Conversions involving process variables like pressure, temperature, density/specific gravity, mass, volume, flow rate, and chemical composition – Chemical equations and stoichiometry |
Systematic analysis of chemical processes | – Unit operations and unit processes – Material and energy balances – Thermodynamics – Chemical reaction engineering – Introduction to material balances without chemical reactions – Limiting and excess reactants – Recycle, Bypass, and Purge calculations |
Gas laws and humidity calculations | – P-V-T relations for gas and gas mixtures – Calculations using the ideal gas law – Use of compressibility charts and equations of state (Van der Waals’) to predict real gas properties from experimental data – Vapour pressure calculations – Clausius Clapeyron equation – Saturation vapour pressure – Vapour-liquid equilibrium calculations using Raoult’s law and Henry’s law – Relative humidity, partial saturation, and humidity |
Chapters | Topics |
Mechanics | – Linear kinematics and its equations of motion, projectile motion, circular motion – Newton’s laws of motion, principle of conservation of momentum applications to linear and planar motion, concept of friction and its laws, motion on smooth and rough inclined planes, simple and complex Atwood’s machines – Concept of work, energy, and power, work-energy principle, principle of conservation of energy – Rotational motion, equations of rotational kinematics, moment of inertia and radius of gyration of a rotating body; torque and angular momentum; work, power, and energy in rotational motion, conservation of angular momentum – Simple harmonic motion and its characteristics, energetics of simple harmonic motion, idea of damped and forced oscillations, resonance and its applications – Wave motion and its characteristics, theory of sound propagation, velocity of sound and factors influencing the velocity of sound, Doppler effect in sound, superposition of sound in space (stationary waves) and time (beats), vibrations of air columns and stretched strings. |
Optics | – Geometrical optics, reflection and refraction of light, reflections by spherical mirrors, refraction through lenses, spherical and chromatic aberrations, dispersion and deviation of light through prism, optical microscopes and telescopes – Wave nature of light; interference, Young’s double-slit experiment, Lloyd’s mirror and Fresnel’s biprism techniques for producing interference pattern, interference through thin film, coloring of thin films; diffraction of light through a single slit, Rayleigh’s criteria of resolution, resolving power of optical instruments; concept of polarization, methods of producing polarized light, analysis of polarized light, Doppler effect in light – Laser, its principle, characteristics, and applications |
Heat | – Thermometry, idea of specific heat and heat capacity, latent heats of fusion and vaporization, variation of specific heats of solids, liquids, and gases with temperature, concept of degree of freedom, law of equipartition of energy – Modes of heat transfer (conduction, convection, and radiation); linear, surface, and volume expansion of matter on heating |
Electrodynamics | – Electric field and electric potential, electric dipole and its field, Gauss’ law and its applications; concept of capacitance, energy stored in a capacitor, effect of introducing dielectric and conducting slabs between plates of a capacitor, dielectric constant of material – Current electricity, Kirchoff’s laws and applications, thermal and chemical effects of current, slide wire bridge, potentiometer, ammeter, and voltmeter – Magnetic effects of current, Biot-Savert law and its applications, Lorentz force, moving coil galvanometers; laws of electromagnetic induction, eddy currents and its applications, self and mutual inductance |
Modern Physics | – Blackbody radiation distribution, photoelectric effect, idea of x-ray production, wave-matter duality, and de-Broglie waves, position-momentum uncertainty principle – Crystalline and amorphous solids, basic idea of crystal structures (simple cubic, body-centered cubic, face-centered cubic) and their characteristics, close-packing morphologies, Schottky and Frenkel defects in crystals – Rutherford scattering experiment, Bohr’s model and hydrogen spectrum. Nucleus and its properties (mass, size, binding energy, magnetic and quadruple moments), nuclear forces and its properties, phenomenon of radioactivity and its laws, modes of radioactive decays (α, β, and γ), nuclear fission, and fusion. |
Chapters | Topics |
Atomic structure and periodic table | – Constituents of the Atom, Bohr’s Model of the Atom, Quantum Number and Electronic Energy Levels, Aufbau’s Principle, Pauli’s Exclusion Principle, Hund’s Rule, n + l Rule, Electronic Configuration of Elements (s, p, d Block Elements), Development of Periodic Table- Modern Periodic Law, Long form of Periodic Table, Study of Periodicity in Physical and Chemical Properties with special reference to – Atomic and Ionic Radii, Ionisation Potential, Electron Affinity, Electronegativity, Variation of Effective Nuclear Charge in a Period, Metallic Character |
Fuels | – Definition, Classification, Calorific Value (HCV and LCV) and Numerical Problems on Calorific Value, Combustion of Fuels, Numerical Problems on Combustion, Solid Fuels – Coal and Coke, Liquid Fuels- Petroleum and its Distillation, Cracking, Octane and Cetane Values of Liquid Fuels, Synthetic Petrol, Power Alcohol, Bio-Gas, Nuclear Fuels – Introduction to Fission and Fusion Reactions |
Water | – Demonstration of water resources on Earth using pie chart., Classification of water – soft water and hard water, action of soap on hard water, types of hardness, causes of hardness, units of hardness – mg per liter (mgL-1) and part per million (ppm) and simple numericals, Disadvantages caused by the use of hard water in domestic and boiler feed water. Removal of hardness – Permutit process and Ion-exchange process. Chemical analysis of water for estimation of Total dissolved solids (TDS), Alkalinity of water. Drinking water and characteristics of drinking water. Natural water sterilization by chlorine and UV radiation and reverse osmosis (elementary idea) |
Environmental Chemistry | – Classification of pollutants, the greenhouse effect, toxic heavy metals, organic compounds as environmental pollutants, ozone layer depletion |
Corrosion | – Types of corrosion, dry and wet corrosion and their mechanisms, types of electrochemical corrosion (galvanic, pitting, waterline, differential aeration, soil, microbiological, intergranular, stress corrosion), factors influencing corrosion, prevention of corrosion |
Chapters | Topics |
Algebra | – Quadratic Equations, equations reducible to quadratic form, relation between roots and coefficients – Arithmetic Progression, Geometric Progression, Harmonic Progression, Series of Natural Numbers |
Matrices | – Concept of linear independence and dependence, Rank of a matrix: Row – Echelon form, System of linear equations: Condition for consistency of system of linear equations, Inverse of a matrix |
Trigonometry | – Trigonometric ratios and their relations, ratios of some standard angles, solution of trigonometric equations, sum and difference formulae, product formulae, multiple and sub-multiple angles |
Coordinate Geometry | – Cartesian coordinates, equations of straight line in various forms, intersection of two straight lines, angle between two lines, distance formula. Equation of circle in various forms, tangent and normal to circle |
Differential Calculus of Functions (1 var) | – Successive Differentiation, Leibnitz Theorem, Expansions of functions: Taylor’s and Maclaurin’s Series, Formulae for remainder term in Taylor and Maclaurin series, Angle of contingence, Curvature, Radius of curvature, Centre of curvature for curves in Cartesian form. Curvature at the origin: Newton’s formulas. |
Differential Calculus of Functions (2 var) | – Concept of limit and continuity of a function of two variables, Partial derivatives, total differential, differentiation of an implicit function, chain rule, change of variables, Jacobian, Taylor’s and Maclaurin’s series. Maxima and minima of a function of two variables: Lagrange’s method of multipliers. |
Ordinary Differential Equations | – Review of geometrical meaning of the differential equation directional fields, Exact differential equations, Integrating factors |
Integral Calculus | – Reduction formula for òsinn x dx, òcosnx dx, ò sinm x cosm x dx, Areas of curves, Length of curves, Volume and surface areas of revolution, Double integrals, Change of order of integration, Areas enclosed by plane curves. |
Vector Differential Calculus | – Vectors and scalar functions and fields, derivatives. Curves, tangents, arc lengths, Curvature and torsion of a curve, Gradient of a Scalar field, Directional Derivative, Divergence of a vector field, Curl of a vector field. |
Vector Integral Calculus | – Line integrals, Line integrals independent of path, Green’s theorem in the plane, Surface Integrals, Triple integrals, Gauss Divergence Theorem, Stoke’s Theorem. |
Chapters | Topics |
General Aptitude | – Coding-Decoding – Directions – Reasoning |
Writing Skills | – Basics of Grammar: Word Order, Sentence Construction, Placing of Subject and Verbs – Parts of Speech: Nouns, Pronouns, Adjectives, Verbs, Adverbs, Use of Tenses, Articles, Active-Passive, Verbal Analogies |
Explore the top recommended books to ace the PULEET exam and boost your preparation effectively.
Subject | Book Titles | Authors |
Mechanical Engineering | “Engineering Mechanics” | S. Timoshenko and D.H. Young |
“Fluid Mechanics” | Frank M. White | |
“Thermodynamics: An Engineering Approach” | Yunus A. Çengel and Michael A. Boles | |
“Introduction to Heat Transfer” | Theodore L. Bergman, et al. | |
Civil Engineering | “Estimating and Costing in Civil Engineering” | B.N. Dutta |
“Soil Mechanics and Foundation Engineering” | Dr. K.R. Arora | |
“Highway Engineering” | S.K. Khanna and C.E.G. Justo | |
“Irrigation Engineering and Hydraulic Structures” | Santosh Kumar Garg | |
Chemical Engineering | “Introduction to Chemical Engineering Thermodynamics” | J.M. Smith, H.C. Van Ness, et al. |
“Unit Operations of Chemical Engineering” | Warren L. McCabe, et al. | |
“Chemical Reaction Engineering” | Octave Levenspiel | |
“Principles of Mass Transfer and Separation Processes” | Binay K. Dutta | |
Physics | “Concepts of Physics” | H.C. Verma |
“Fundamentals of Physics” | Halliday, Resnick, and Walker | |
“Problems in General Physics” | I.E. Irodov | |
“Physics for Scientists and Engineers” | Serway and Jewett | |
Mathematics | “Higher Engineering Mathematics” | B.S. Grewal |
“Advanced Engineering Mathematics” | Erwin Kreyszig | |
“Engineering Mathematics” | K.A. Stroud | |
“Higher Engineering Mathematics” | John Bird | |
General Aptitude & Communication Skills | “A Modern Approach to Verbal & Non-Verbal Reasoning” | R.S. Aggarwal |
“Quantitative Aptitude for Competitive Examinations” | R.S. Aggarwal | |
“High School English Grammar & Composition” | Wren & Martin |
Preparing for PULEET requires a systematic approach and dedicated effort. Here are some preparation tips to help you excel in the exam:
The PULEET 2024 admit card will be issued a few days before the exam date. Candidates who have applied for PULEET 2024 can access their admit cards online from the official website puleet.puchd.ac.in. To download the admit card, candidates will require their login details. A direct link to download the admit card will also be provided on this page once it becomes available. The PULEET admit card 2024 is a crucial document necessary for appearing in the exam. Without the admit card, candidates will not be allowed entry into the exam hall.
To download the PULEET 2024 admit card, candidates can follow these steps:
After the PULEET 2024 exam is conducted, the official answer key will be made available online on the official website of Panjab University, Chandigarh. Candidates will be able to download the answer key from the website, and a link for this purpose will be updated on this page for easy access.
The PULEET official answer key 2024 will contain the correct answers to all the questions asked in the exam. This will enable candidates to calculate their scores by comparing their responses with the correct ones provided in the answer key. With the help of the answer key, candidates can determine the number of correct and incorrect responses, and consequently, estimate their rank in the examination.
To download the PULEET (Panjab University Lateral Entry Entrance Test) Answer Key, candidates can follow these steps:
After the PULEET 2024 exam, Panjab University will announce the results shortly thereafter. Candidates can view their results by logging in with their assigned ID and password. We will provide a direct link to access the PULEET 2024 result on this page once it is available.
In case a candidate is dissatisfied with their result, they have the option to verify it. The concerned authority will furnish a copy of the PULEET answer sheet upon payment of Rs 10,000/- within ten days of the result declaration. Furthermore, the office is obligated to complete the entire procedure within three working days.
To check the PULEET (Panjab University Lateral Entry Entrance Test) result, follow these steps:
Counselling for PULEET 2024 is open to candidates who successfully pass the exam and are listed on the rank/merit list. To take part in counselling, candidates must submit the admission form and attend according to the scheduled time. Additionally, candidates must bring all required documents on the counselling day.
During the counselling process for PULEET, candidates are required to present a set of documents for verification. These documents serve as proof of their eligibility and academic qualifications. Here’s a detailed list of the documents typically required at the counselling session:
PULEET facilitates admission to various esteemed engineering institutions in Chandigarh, offering a seamless transition for diploma holders to pursue their Bachelor of Engineering (BE) degree.
Name | Chandigarh College of Engineering and Technology |
Location | Chandigarh |
Ownership | Government |
Courses Offered | 4 Courses |
Exams Accepted | PULEET |
Total Tuition Fees | ₹1.93 L |
Median Salary | ₹5.5 LPA |
Get in touch with the PULEET admission coordinator at Panjab University, Chandigarh, for any inquiries or assistance regarding the entrance test.
Coordinator | PULEET Admission |
Position | Assistant Registrar, CET Cell |
Institution | Panjab University |
Address | Sector 14, Chandigarh – 160 014 |
puleet@pu.ac.in |
The Panjab University Lateral Engineering Entrance Test (PULEET) serves as a gateway for aspiring engineers to secure admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. With its rigorous examination process and comprehensive syllabus covering various engineering fundamentals, PULEET ensures that candidates possess the necessary knowledge and skills to excel in their academic pursuits.
The exam’s popularity and significance are evidenced by the increasing number of applicants each year, reflecting the aspirants’ keen interest in pursuing engineering studies at a prestigious institution like Panjab University. As PULEET continues to uphold its standards of excellence and fairness in the admission process, it remains a crucial milestone for engineering aspirants seeking to embark on a fulfilling educational journey and build a successful career in the field of engineering.
For any queries regarding above topic, please tell us through below comment session.
PULEET 2024 Application Form will be released on 1st May 2024. The Panjab University Lateral Engineering Entrance Test (PULEET) is a crucial examination facilitating admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. Designed for candidates holding diplomas in engineering or vocational studies, PULEET offers a direct pathway to pursue higher education in various engineering disciplines.
Each year, a significant number of aspirants participate in PULEET, reflecting the exam’s popularity and the growing demand for engineering education. With its comprehensive syllabus covering subjects like mathematics, physics, chemistry, and general aptitude, PULEET assesses candidates’ knowledge and aptitude in engineering fundamentals.
The rigorous examination process ensures that only the most deserving candidates secure admission, contributing to the reputation of Panjab University as a premier institution for engineering studies. PULEET serves as a vital platform for aspiring engineers to realize their academic aspirations and embark on a rewarding career path in the field of engineering.
PULEET 2024 Notification – Application Out Soon
PULEET, or the Panjab University Lateral Engineering Entrance Test, serves as a gateway for aspirants seeking admission into the second year of the Bachelor of Engineering (BE) degree program at Panjab University, Chandigarh. This entrance examination enables candidates with a diploma in engineering or vocational studies to directly enter the second year of the BE program across various engineering disciplines.
The BE program offered by Panjab University encompasses a diverse range of fields including Chemical Engineering, Food Technology, Computer Science Engineering, Information Technology, Electronics & Communication, Biotechnology, Electrical & Electronics, and Mechanical Engineering. PULEET is conducted annually by the university’s admission authority and provides candidates with an opportunity to pursue higher education and advance their career prospects in the field of engineering. With its comprehensive syllabus and rigorous examination process, PULEET ensures the selection of candidates based on their merit and aptitude for engineering studies.
Panjab University Lateral Engineering Entrance Test (PULEET) is an annual exam conducted in English and Hindi languages, featuring an offline mode, with a duration of 1 hour 40 minutes, comprising 100 multiple-choice questions, and charging an application fee of INR 2,395 for General category and INR 1,198 for SC/ST/PwD categories.
Particulars | Details |
Full Exam Name | Panjab University Lateral Engineering Entrance Test |
Short Exam Name | PULEET |
Frequency | Once in a year |
Languages | English, Hindi |
Mode of Application | Online |
Application Fee | General: INR 2,395 |
SC/ST/PwD: INR 1,198 | |
Mode of Exam | Offline |
Exam Duration | 1 hour 40 minutes |
Exam Marks | 100 Marks (Multiple Choice Questions) |
1 Mark is awarded for each correct answer | |
Negative Marking: ¼ marks will be deducted for wrong answers |
Stay updated with the important dates for PULEET 2024, including application deadlines, admit card release, exam date, and result declaration.
Event | Dates |
Starting Date of Application Form | 1st May 2024 |
Closing Date of Application Form | 4th June 2024 |
Admit Card Release | Last week of June 2024 |
Examination Date | 22nd June 2024 |
Result Declaration | Last week of August 2024 |
The PULEET 2024 application form is anticipated to be released in 1st May 2024 on the official website at puleet.puchd.ac.in. Candidates aspiring to secure admission to Panjab University, Chandigarh, must complete the application process by filling out the application form. The direct link to access the application form will also be provided on the official website once it is released. Candidates are advised not to submit the PULEET application form 2024 through email, fax, post, etc.
Candidates are required to pay the application fee to successfully submit the PULEET 2024 application form. The application fee for different categories is as follows:
Category | Application Fee |
General | INR 2395/- |
SC/ST/PwD | INR 1198/- |
To fill out the PULEET (Panjab University Lateral Entry Entrance Test) application form, candidates should follow these steps:
Candidates must adhere to the eligibility criteria to apply for the exam. The admission authority strictly enforces these criteria, and applications from non-eligible candidates will not be entertained. Here are the eligibility requirements for PULEET 2024:
Candidates appearing for the PULEET 2024 exam must familiarize themselves with its exam pattern to understand the marking scheme, question types, duration of the examination, and other relevant details.
Particulars | Details |
Medium of Exam | English only |
Duration of Exam | 1 hour 40 minutes |
Types of Questions | MCQ (Multiple Choice Questions) |
Mode of Exam | Offline |
Subjects | General Engineering, Physics, Chemistry, Mathematics, and General Aptitude & Communication Skills |
Total Questions | 100 |
Marking Scheme | 1 mark for each correct answer |
1/4 negative marking |
The syllabus for PULEET 2024 encompasses various subjects including basic electrical engineering, basic electronics, programming fundamentals, fundamentals of mechanical engineering, fundamentals of civil engineering, fundamentals of chemical engineering, physics, chemistry, mathematics, and general aptitude & communication skills.
Chapters | Topics |
Electric Machines | Operating principle and application of DC machine as generator and motor, EMF and Torque equations, methods of excitation. Operating principle and applications of 3 phase squirrel cage and slip ring induction motors, equivalent circuit and torque speed characteristics (qualitative treatment). Operating principle of single phase induction motor (split Phase and capacitor motors), torque-speed characteristics (qualitative treatment). Principle of operation and applications of variable reluctance, permanent magnet and hybrid stepper motors, speed torque characteristics (qualitative approach). |
Transformers | Introduction, Basic Principle, EMF equation, approximate equivalent circuit, phasor diagram, losses, efficiency and condition for maximum efficiency, voltage regulation, open circuit and short circuit tests. |
Magnetic Circuit | Introduction to magnetic circuit, magneto motive force and magnetic field strength, permeability of free space, relative permeability, reluctance, comparison of electric and magnetic circuits, B/H curve, magnetic circuits calculations, self and mutual inductance. |
Three Phase AC Fundamentals | Disadvantages of single phase system, three phase voltages and currents, voltages and currents in star and delta connected systems, power in a three phase system, solution of three phase balanced circuits, power and power factor measurement by two watt-meter method. |
Single Phase AC Fundamentals | Alternating current systems, waveform terms and definitions, average and r.m.s. values of alternating quantities, phasor notation, solution and phasor diagram of single phase ac circuits with sinusoidal source excitation. |
DC circuits | Voltage and current sources, Kirchhoff’s laws and network solution, network analysis by mesh and node analysis, superposition theorem, Thevenin’s theorem, Norton’s theorem, delta-star transformation and vice-versa, maximum- power transfer theorem, energy storage elements, step response of RL, RC and RLC circuits. |
Chapters | Topics |
Communication | Basic Concepts, Modulation, Need for modulation, introduction to AM, FM, PM. Test and measuring instruments, Block diagram, concept of digital electronic voltmeters, ammeter and wattmeter, CRO, Signal Generators, Sensors and Transducers and their classification. Working principle of resistive, capacitive, photosensitive and temperature transducers. Block diagram and working principle of analog and digital data acquisition system. |
Flip flops | Concept of flip-flops, RS, D, JK and T types, triggered and clocked, master slave, Shift Register, concept of synchronous and asynchronous counters. Half and full adder, subtractor, Seven Segment display, Concept of Mux, deMux, decoder and encoder. |
Boolean algebra and logic gates | Binary and Hexadecimal number system, BCD and weighted codes, Binary arithmetic, Logic-positive and negative logic, basic and universal logic gates. Boolean algebra and postulates, reduction of Boolean expression. |
Oscillators | Block Diagram of feedback circuit used as an oscillator, Barkhausen criterion, types of oscillators. |
Operational amplifiers | Block Diagram, Characteristics of an ideal OP-AMP, Application of OP-AMP as an Inverting amplifier, Phase Shifter, Scale Changer, Non-inverting amplifier, Adder or Summing amplifier, differential or difference amplifier, integrator. |
Chapters | Topics |
Introduction | Computer Basic, Block Diagram of Computer, Memory Hierarchy, Types of RAM, Secondary Memory Introduction to Operating Systems, Programming Languages, Program Structure, Linux Shell Commands, Bourne Shell, C Shell, Korn Shell. |
Basic Constructs of C | Keywords, Identifiers, Variables, Symbolic Constants, Data Types and their storage, Operands, Arithmetic Operators, Relational Operators, Logical Operators, Bitwise Operators, Increment & Decrement Operators, Expressions, Conditional Expressions, Assignment Operators and Expressions, Type Conversions, Precedence and Order of Evaluation, External Variables and Scope of Variables. Basic Input Output, Formatted I/O. |
Program Control Flow | Statements and Blocks, Conditional Statements, IF, ELSE-IF, Switch Case statements, Control Loops, For, While and Do-While, Go to and Labels. |
Arrays & Functions | Pointers and Addresses, Arrays, Multi-dimensional arrays, strings, pointer arrays, Functions, Function Prototyping, Scope of functions, Arguments, Call by value and call by references, static variables, recursion, C-Preprocessor and Macros, Command line arguments. |
Structures | Structures, Array of Structures, pointer to structures, Typedef, Unions, Bit fields, passing structures as an argument to functions |
Input and Output | Standard and Formatted Input and Output, File Access & its types, Line Input and Output, Types of Files, Binary & ASCII Files, Error handling, stderr and Exit functions |
Chapters | Topics |
Bending and Torsion | – Stress in beams due to bending, proof of formulae M/I = f/y = E/R and its application to beams of rectangular and circular section. – Application of torsion equation to hollow and solid circular shaft |
Bending moment (B.M.) and Shear force (S.F.) | – Diagrams for cantilevers, simply supported beams with or without overhang and calculation of maximum B.M. and S.F. and the point of contra flexure under the following loads. – Concentrated loads, Uniformly distributed loads over the whole span or part of span, combination of concentrated loads (two or three) and uniformly distributed loads. |
Simple Stress and Strains | – Concept of stress and strain. – Stress and strains in bars subjected to tension and compression, stress-strain diagrams, mechanical properties, factor of safety, Extension of Uniform bar under its own weight, stress produced in compound bars (two or three) due to axial loads. |
Flow Measurement | – Pilot tube, Venturimeter, Orificemeter, Notches (Rectangular & Triangular) and weirs, Rotameter. |
Fluid Dynamics | – Equation of continuity, Euler’s Equation, Bernoulli’s equation, simple applications to one-dimensional flow problems. |
Kinematics Of Fluid Flow | – Types of flow, acceleration in fluid flow, streamlines, stream tubes, irrotational flow, stream function, velocity potential, flow nets. |
Power Cycles | – Carnot and Rankine steam power cycles. – Effect of mean temperature of heat addition on Ranking cycle efficiency. – Otto, Diesel, and Dual combustion cycles for reciprocating I.C. engines. |
Steam and Its Formation | – P-V, P-T, T-S, H-S diagrams of water. – Dryness fraction and its measurement by calorimeter. – Uses of steam tables and Mollier chart (H-S chart). |
Laws of Thermodynamics | – First law of thermodynamics, Steady flow energy equation and its applications (nozzle, throttling device, turbine, compressor, heat exchanger). – Limitations of the first law, statements of the second law by Max-Planck and Clausius, equivalence between the two statements. – Reversible and irreversible processes, Carnot’s theorem. – Energy analysis of a heat engine, refrigerator, and heat pump. |
Chapters | Topics |
Estimation and Costing | – Estimation and Types of estimation – Analysis of Rates – Irrigation Work Estimation – Road Work Estimation and Valuation |
Soil Mechanics | – Physical Properties of soil and Soil classification – Water flow through soil and Soil Deformation – Strength Characteristics of soil and soil Compaction – Bearing Capacity and Site Exploration |
Transportation Engineering | – Road Geometrics – Highway Surveying – Road Material and Pavement – Road Drainage and Maintenance |
Irrigation Engineering | – Rainfall and Run off – Crops water requirement – Irrigation and types of irrigation – Canal Works – Water logging and Drainage – Dams |
Surveying | – Chain & Compass Surveying – Leveling using Dumping and IOP Level |
Steel Structure | – Structural Steel Section and Connections – Tension, Compression, and Beam Members |
Reinforced Concrete Structures | – Reinforcement – Theory of RCC Beams – Bonds in RCC Beams – Singly & Doubly RCC Beams – RCC Slabs – Reinforced Brick Works and Columns |
Concrete and Structures | – Concrete and Properties of Concrete – Formwork, ordinary and special concrete – Concrete Operation – Stress & strain, Bending Moment & Shear Force – Slope and Deflection – Columns and trusses |
Hydraulics | – Fluids and Properties of fluids – Hydrostatic Pressure – fluid flow and measurement through pipe and open channel |
Construction Material and Building Construction | – Rock, Bricks & Tiles – Cement, Lime Timber and paints – Excavation of foundation – Brick Masonry – Stone Masonry – Wall, Mortar & Concrete – Damp-proofing – Doors-windows – Roof, Floors, Stairs, and Building planning |
Chapters | Topics |
Introduction to Engineering Calculations | – Units and dimensions – Conversion of units – Systems of units – Dimensional homogeneity and dimensionless quantities – Conversions involving process variables like pressure, temperature, density/specific gravity, mass, volume, flow rate, and chemical composition – Chemical equations and stoichiometry |
Systematic analysis of chemical processes | – Unit operations and unit processes – Material and energy balances – Thermodynamics – Chemical reaction engineering – Introduction to material balances without chemical reactions – Limiting and excess reactants – Recycle, Bypass, and Purge calculations |
Gas laws and humidity calculations | – P-V-T relations for gas and gas mixtures – Calculations using the ideal gas law – Use of compressibility charts and equations of state (Van der Waals’) to predict real gas properties from experimental data – Vapour pressure calculations – Clausius Clapeyron equation – Saturation vapour pressure – Vapour-liquid equilibrium calculations using Raoult’s law and Henry’s law – Relative humidity, partial saturation, and humidity |
Chapters | Topics |
Mechanics | – Linear kinematics and its equations of motion, projectile motion, circular motion – Newton’s laws of motion, principle of conservation of momentum applications to linear and planar motion, concept of friction and its laws, motion on smooth and rough inclined planes, simple and complex Atwood’s machines – Concept of work, energy, and power, work-energy principle, principle of conservation of energy – Rotational motion, equations of rotational kinematics, moment of inertia and radius of gyration of a rotating body; torque and angular momentum; work, power, and energy in rotational motion, conservation of angular momentum – Simple harmonic motion and its characteristics, energetics of simple harmonic motion, idea of damped and forced oscillations, resonance and its applications – Wave motion and its characteristics, theory of sound propagation, velocity of sound and factors influencing the velocity of sound, Doppler effect in sound, superposition of sound in space (stationary waves) and time (beats), vibrations of air columns and stretched strings. |
Optics | – Geometrical optics, reflection and refraction of light, reflections by spherical mirrors, refraction through lenses, spherical and chromatic aberrations, dispersion and deviation of light through prism, optical microscopes and telescopes – Wave nature of light; interference, Young’s double-slit experiment, Lloyd’s mirror and Fresnel’s biprism techniques for producing interference pattern, interference through thin film, coloring of thin films; diffraction of light through a single slit, Rayleigh’s criteria of resolution, resolving power of optical instruments; concept of polarization, methods of producing polarized light, analysis of polarized light, Doppler effect in light – Laser, its principle, characteristics, and applications |
Heat | – Thermometry, idea of specific heat and heat capacity, latent heats of fusion and vaporization, variation of specific heats of solids, liquids, and gases with temperature, concept of degree of freedom, law of equipartition of energy – Modes of heat transfer (conduction, convection, and radiation); linear, surface, and volume expansion of matter on heating |
Electrodynamics | – Electric field and electric potential, electric dipole and its field, Gauss’ law and its applications; concept of capacitance, energy stored in a capacitor, effect of introducing dielectric and conducting slabs between plates of a capacitor, dielectric constant of material – Current electricity, Kirchoff’s laws and applications, thermal and chemical effects of current, slide wire bridge, potentiometer, ammeter, and voltmeter – Magnetic effects of current, Biot-Savert law and its applications, Lorentz force, moving coil galvanometers; laws of electromagnetic induction, eddy currents and its applications, self and mutual inductance |
Modern Physics | – Blackbody radiation distribution, photoelectric effect, idea of x-ray production, wave-matter duality, and de-Broglie waves, position-momentum uncertainty principle – Crystalline and amorphous solids, basic idea of crystal structures (simple cubic, body-centered cubic, face-centered cubic) and their characteristics, close-packing morphologies, Schottky and Frenkel defects in crystals – Rutherford scattering experiment, Bohr’s model and hydrogen spectrum. Nucleus and its properties (mass, size, binding energy, magnetic and quadruple moments), nuclear forces and its properties, phenomenon of radioactivity and its laws, modes of radioactive decays (α, β, and γ), nuclear fission, and fusion. |
Chapters | Topics |
Atomic structure and periodic table | – Constituents of the Atom, Bohr’s Model of the Atom, Quantum Number and Electronic Energy Levels, Aufbau’s Principle, Pauli’s Exclusion Principle, Hund’s Rule, n + l Rule, Electronic Configuration of Elements (s, p, d Block Elements), Development of Periodic Table- Modern Periodic Law, Long form of Periodic Table, Study of Periodicity in Physical and Chemical Properties with special reference to – Atomic and Ionic Radii, Ionisation Potential, Electron Affinity, Electronegativity, Variation of Effective Nuclear Charge in a Period, Metallic Character |
Fuels | – Definition, Classification, Calorific Value (HCV and LCV) and Numerical Problems on Calorific Value, Combustion of Fuels, Numerical Problems on Combustion, Solid Fuels – Coal and Coke, Liquid Fuels- Petroleum and its Distillation, Cracking, Octane and Cetane Values of Liquid Fuels, Synthetic Petrol, Power Alcohol, Bio-Gas, Nuclear Fuels – Introduction to Fission and Fusion Reactions |
Water | – Demonstration of water resources on Earth using pie chart., Classification of water – soft water and hard water, action of soap on hard water, types of hardness, causes of hardness, units of hardness – mg per liter (mgL-1) and part per million (ppm) and simple numericals, Disadvantages caused by the use of hard water in domestic and boiler feed water. Removal of hardness – Permutit process and Ion-exchange process. Chemical analysis of water for estimation of Total dissolved solids (TDS), Alkalinity of water. Drinking water and characteristics of drinking water. Natural water sterilization by chlorine and UV radiation and reverse osmosis (elementary idea) |
Environmental Chemistry | – Classification of pollutants, the greenhouse effect, toxic heavy metals, organic compounds as environmental pollutants, ozone layer depletion |
Corrosion | – Types of corrosion, dry and wet corrosion and their mechanisms, types of electrochemical corrosion (galvanic, pitting, waterline, differential aeration, soil, microbiological, intergranular, stress corrosion), factors influencing corrosion, prevention of corrosion |
Chapters | Topics |
Algebra | – Quadratic Equations, equations reducible to quadratic form, relation between roots and coefficients – Arithmetic Progression, Geometric Progression, Harmonic Progression, Series of Natural Numbers |
Matrices | – Concept of linear independence and dependence, Rank of a matrix: Row – Echelon form, System of linear equations: Condition for consistency of system of linear equations, Inverse of a matrix |
Trigonometry | – Trigonometric ratios and their relations, ratios of some standard angles, solution of trigonometric equations, sum and difference formulae, product formulae, multiple and sub-multiple angles |
Coordinate Geometry | – Cartesian coordinates, equations of straight line in various forms, intersection of two straight lines, angle between two lines, distance formula. Equation of circle in various forms, tangent and normal to circle |
Differential Calculus of Functions (1 var) | – Successive Differentiation, Leibnitz Theorem, Expansions of functions: Taylor’s and Maclaurin’s Series, Formulae for remainder term in Taylor and Maclaurin series, Angle of contingence, Curvature, Radius of curvature, Centre of curvature for curves in Cartesian form. Curvature at the origin: Newton’s formulas. |
Differential Calculus of Functions (2 var) | – Concept of limit and continuity of a function of two variables, Partial derivatives, total differential, differentiation of an implicit function, chain rule, change of variables, Jacobian, Taylor’s and Maclaurin’s series. Maxima and minima of a function of two variables: Lagrange’s method of multipliers. |
Ordinary Differential Equations | – Review of geometrical meaning of the differential equation directional fields, Exact differential equations, Integrating factors |
Integral Calculus | – Reduction formula for òsinn x dx, òcosnx dx, ò sinm x cosm x dx, Areas of curves, Length of curves, Volume and surface areas of revolution, Double integrals, Change of order of integration, Areas enclosed by plane curves. |
Vector Differential Calculus | – Vectors and scalar functions and fields, derivatives. Curves, tangents, arc lengths, Curvature and torsion of a curve, Gradient of a Scalar field, Directional Derivative, Divergence of a vector field, Curl of a vector field. |
Vector Integral Calculus | – Line integrals, Line integrals independent of path, Green’s theorem in the plane, Surface Integrals, Triple integrals, Gauss Divergence Theorem, Stoke’s Theorem. |
Chapters | Topics |
General Aptitude | – Coding-Decoding – Directions – Reasoning |
Writing Skills | – Basics of Grammar: Word Order, Sentence Construction, Placing of Subject and Verbs – Parts of Speech: Nouns, Pronouns, Adjectives, Verbs, Adverbs, Use of Tenses, Articles, Active-Passive, Verbal Analogies |
Explore the top recommended books to ace the PULEET exam and boost your preparation effectively.
Subject | Book Titles | Authors |
Mechanical Engineering | “Engineering Mechanics” | S. Timoshenko and D.H. Young |
“Fluid Mechanics” | Frank M. White | |
“Thermodynamics: An Engineering Approach” | Yunus A. Çengel and Michael A. Boles | |
“Introduction to Heat Transfer” | Theodore L. Bergman, et al. | |
Civil Engineering | “Estimating and Costing in Civil Engineering” | B.N. Dutta |
“Soil Mechanics and Foundation Engineering” | Dr. K.R. Arora | |
“Highway Engineering” | S.K. Khanna and C.E.G. Justo | |
“Irrigation Engineering and Hydraulic Structures” | Santosh Kumar Garg | |
Chemical Engineering | “Introduction to Chemical Engineering Thermodynamics” | J.M. Smith, H.C. Van Ness, et al. |
“Unit Operations of Chemical Engineering” | Warren L. McCabe, et al. | |
“Chemical Reaction Engineering” | Octave Levenspiel | |
“Principles of Mass Transfer and Separation Processes” | Binay K. Dutta | |
Physics | “Concepts of Physics” | H.C. Verma |
“Fundamentals of Physics” | Halliday, Resnick, and Walker | |
“Problems in General Physics” | I.E. Irodov | |
“Physics for Scientists and Engineers” | Serway and Jewett | |
Mathematics | “Higher Engineering Mathematics” | B.S. Grewal |
“Advanced Engineering Mathematics” | Erwin Kreyszig | |
“Engineering Mathematics” | K.A. Stroud | |
“Higher Engineering Mathematics” | John Bird | |
General Aptitude & Communication Skills | “A Modern Approach to Verbal & Non-Verbal Reasoning” | R.S. Aggarwal |
“Quantitative Aptitude for Competitive Examinations” | R.S. Aggarwal | |
“High School English Grammar & Composition” | Wren & Martin |
Preparing for PULEET requires a systematic approach and dedicated effort. Here are some preparation tips to help you excel in the exam:
The PULEET 2024 admit card will be issued a few days before the exam date. Candidates who have applied for PULEET 2024 can access their admit cards online from the official website puleet.puchd.ac.in. To download the admit card, candidates will require their login details. A direct link to download the admit card will also be provided on this page once it becomes available. The PULEET admit card 2024 is a crucial document necessary for appearing in the exam. Without the admit card, candidates will not be allowed entry into the exam hall.
To download the PULEET 2024 admit card, candidates can follow these steps:
After the PULEET 2024 exam is conducted, the official answer key will be made available online on the official website of Panjab University, Chandigarh. Candidates will be able to download the answer key from the website, and a link for this purpose will be updated on this page for easy access.
The PULEET official answer key 2024 will contain the correct answers to all the questions asked in the exam. This will enable candidates to calculate their scores by comparing their responses with the correct ones provided in the answer key. With the help of the answer key, candidates can determine the number of correct and incorrect responses, and consequently, estimate their rank in the examination.
To download the PULEET (Panjab University Lateral Entry Entrance Test) Answer Key, candidates can follow these steps:
After the PULEET 2024 exam, Panjab University will announce the results shortly thereafter. Candidates can view their results by logging in with their assigned ID and password. We will provide a direct link to access the PULEET 2024 result on this page once it is available.
In case a candidate is dissatisfied with their result, they have the option to verify it. The concerned authority will furnish a copy of the PULEET answer sheet upon payment of Rs 10,000/- within ten days of the result declaration. Furthermore, the office is obligated to complete the entire procedure within three working days.
To check the PULEET (Panjab University Lateral Entry Entrance Test) result, follow these steps:
Counselling for PULEET 2024 is open to candidates who successfully pass the exam and are listed on the rank/merit list. To take part in counselling, candidates must submit the admission form and attend according to the scheduled time. Additionally, candidates must bring all required documents on the counselling day.
During the counselling process for PULEET, candidates are required to present a set of documents for verification. These documents serve as proof of their eligibility and academic qualifications. Here’s a detailed list of the documents typically required at the counselling session:
PULEET facilitates admission to various esteemed engineering institutions in Chandigarh, offering a seamless transition for diploma holders to pursue their Bachelor of Engineering (BE) degree.
Name | Chandigarh College of Engineering and Technology |
Location | Chandigarh |
Ownership | Government |
Courses Offered | 4 Courses |
Exams Accepted | PULEET |
Total Tuition Fees | ₹1.93 L |
Median Salary | ₹5.5 LPA |
Get in touch with the PULEET admission coordinator at Panjab University, Chandigarh, for any inquiries or assistance regarding the entrance test.
Coordinator | PULEET Admission |
Position | Assistant Registrar, CET Cell |
Institution | Panjab University |
Address | Sector 14, Chandigarh – 160 014 |
puleet@pu.ac.in |
The Panjab University Lateral Engineering Entrance Test (PULEET) serves as a gateway for aspiring engineers to secure admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. With its rigorous examination process and comprehensive syllabus covering various engineering fundamentals, PULEET ensures that candidates possess the necessary knowledge and skills to excel in their academic pursuits.
The exam’s popularity and significance are evidenced by the increasing number of applicants each year, reflecting the aspirants’ keen interest in pursuing engineering studies at a prestigious institution like Panjab University. As PULEET continues to uphold its standards of excellence and fairness in the admission process, it remains a crucial milestone for engineering aspirants seeking to embark on a fulfilling educational journey and build a successful career in the field of engineering.
For any queries regarding above topic, please tell us through below comment session.
PULEET 2024 Application Form will be released on 1st May 2024. The Panjab University Lateral Engineering Entrance Test (PULEET) is a crucial examination facilitating admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. Designed for candidates holding diplomas in engineering or vocational studies, PULEET offers a direct pathway to pursue higher education in various engineering disciplines.
Each year, a significant number of aspirants participate in PULEET, reflecting the exam’s popularity and the growing demand for engineering education. With its comprehensive syllabus covering subjects like mathematics, physics, chemistry, and general aptitude, PULEET assesses candidates’ knowledge and aptitude in engineering fundamentals.
The rigorous examination process ensures that only the most deserving candidates secure admission, contributing to the reputation of Panjab University as a premier institution for engineering studies. PULEET serves as a vital platform for aspiring engineers to realize their academic aspirations and embark on a rewarding career path in the field of engineering.
PULEET 2024 Notification – Application Out Soon
PULEET, or the Panjab University Lateral Engineering Entrance Test, serves as a gateway for aspirants seeking admission into the second year of the Bachelor of Engineering (BE) degree program at Panjab University, Chandigarh. This entrance examination enables candidates with a diploma in engineering or vocational studies to directly enter the second year of the BE program across various engineering disciplines.
The BE program offered by Panjab University encompasses a diverse range of fields including Chemical Engineering, Food Technology, Computer Science Engineering, Information Technology, Electronics & Communication, Biotechnology, Electrical & Electronics, and Mechanical Engineering. PULEET is conducted annually by the university’s admission authority and provides candidates with an opportunity to pursue higher education and advance their career prospects in the field of engineering. With its comprehensive syllabus and rigorous examination process, PULEET ensures the selection of candidates based on their merit and aptitude for engineering studies.
Panjab University Lateral Engineering Entrance Test (PULEET) is an annual exam conducted in English and Hindi languages, featuring an offline mode, with a duration of 1 hour 40 minutes, comprising 100 multiple-choice questions, and charging an application fee of INR 2,395 for General category and INR 1,198 for SC/ST/PwD categories.
Particulars | Details |
Full Exam Name | Panjab University Lateral Engineering Entrance Test |
Short Exam Name | PULEET |
Frequency | Once in a year |
Languages | English, Hindi |
Mode of Application | Online |
Application Fee | General: INR 2,395 |
SC/ST/PwD: INR 1,198 | |
Mode of Exam | Offline |
Exam Duration | 1 hour 40 minutes |
Exam Marks | 100 Marks (Multiple Choice Questions) |
1 Mark is awarded for each correct answer | |
Negative Marking: ¼ marks will be deducted for wrong answers |
Stay updated with the important dates for PULEET 2024, including application deadlines, admit card release, exam date, and result declaration.
Event | Dates |
Starting Date of Application Form | 1st May 2024 |
Closing Date of Application Form | 4th June 2024 |
Admit Card Release | Last week of June 2024 |
Examination Date | 22nd June 2024 |
Result Declaration | Last week of August 2024 |
The PULEET 2024 application form is anticipated to be released in 1st May 2024 on the official website at puleet.puchd.ac.in. Candidates aspiring to secure admission to Panjab University, Chandigarh, must complete the application process by filling out the application form. The direct link to access the application form will also be provided on the official website once it is released. Candidates are advised not to submit the PULEET application form 2024 through email, fax, post, etc.
Candidates are required to pay the application fee to successfully submit the PULEET 2024 application form. The application fee for different categories is as follows:
Category | Application Fee |
General | INR 2395/- |
SC/ST/PwD | INR 1198/- |
To fill out the PULEET (Panjab University Lateral Entry Entrance Test) application form, candidates should follow these steps:
Candidates must adhere to the eligibility criteria to apply for the exam. The admission authority strictly enforces these criteria, and applications from non-eligible candidates will not be entertained. Here are the eligibility requirements for PULEET 2024:
Candidates appearing for the PULEET 2024 exam must familiarize themselves with its exam pattern to understand the marking scheme, question types, duration of the examination, and other relevant details.
Particulars | Details |
Medium of Exam | English only |
Duration of Exam | 1 hour 40 minutes |
Types of Questions | MCQ (Multiple Choice Questions) |
Mode of Exam | Offline |
Subjects | General Engineering, Physics, Chemistry, Mathematics, and General Aptitude & Communication Skills |
Total Questions | 100 |
Marking Scheme | 1 mark for each correct answer |
1/4 negative marking |
The syllabus for PULEET 2024 encompasses various subjects including basic electrical engineering, basic electronics, programming fundamentals, fundamentals of mechanical engineering, fundamentals of civil engineering, fundamentals of chemical engineering, physics, chemistry, mathematics, and general aptitude & communication skills.
Chapters | Topics |
Electric Machines | Operating principle and application of DC machine as generator and motor, EMF and Torque equations, methods of excitation. Operating principle and applications of 3 phase squirrel cage and slip ring induction motors, equivalent circuit and torque speed characteristics (qualitative treatment). Operating principle of single phase induction motor (split Phase and capacitor motors), torque-speed characteristics (qualitative treatment). Principle of operation and applications of variable reluctance, permanent magnet and hybrid stepper motors, speed torque characteristics (qualitative approach). |
Transformers | Introduction, Basic Principle, EMF equation, approximate equivalent circuit, phasor diagram, losses, efficiency and condition for maximum efficiency, voltage regulation, open circuit and short circuit tests. |
Magnetic Circuit | Introduction to magnetic circuit, magneto motive force and magnetic field strength, permeability of free space, relative permeability, reluctance, comparison of electric and magnetic circuits, B/H curve, magnetic circuits calculations, self and mutual inductance. |
Three Phase AC Fundamentals | Disadvantages of single phase system, three phase voltages and currents, voltages and currents in star and delta connected systems, power in a three phase system, solution of three phase balanced circuits, power and power factor measurement by two watt-meter method. |
Single Phase AC Fundamentals | Alternating current systems, waveform terms and definitions, average and r.m.s. values of alternating quantities, phasor notation, solution and phasor diagram of single phase ac circuits with sinusoidal source excitation. |
DC circuits | Voltage and current sources, Kirchhoff’s laws and network solution, network analysis by mesh and node analysis, superposition theorem, Thevenin’s theorem, Norton’s theorem, delta-star transformation and vice-versa, maximum- power transfer theorem, energy storage elements, step response of RL, RC and RLC circuits. |
Chapters | Topics |
Communication | Basic Concepts, Modulation, Need for modulation, introduction to AM, FM, PM. Test and measuring instruments, Block diagram, concept of digital electronic voltmeters, ammeter and wattmeter, CRO, Signal Generators, Sensors and Transducers and their classification. Working principle of resistive, capacitive, photosensitive and temperature transducers. Block diagram and working principle of analog and digital data acquisition system. |
Flip flops | Concept of flip-flops, RS, D, JK and T types, triggered and clocked, master slave, Shift Register, concept of synchronous and asynchronous counters. Half and full adder, subtractor, Seven Segment display, Concept of Mux, deMux, decoder and encoder. |
Boolean algebra and logic gates | Binary and Hexadecimal number system, BCD and weighted codes, Binary arithmetic, Logic-positive and negative logic, basic and universal logic gates. Boolean algebra and postulates, reduction of Boolean expression. |
Oscillators | Block Diagram of feedback circuit used as an oscillator, Barkhausen criterion, types of oscillators. |
Operational amplifiers | Block Diagram, Characteristics of an ideal OP-AMP, Application of OP-AMP as an Inverting amplifier, Phase Shifter, Scale Changer, Non-inverting amplifier, Adder or Summing amplifier, differential or difference amplifier, integrator. |
Chapters | Topics |
Introduction | Computer Basic, Block Diagram of Computer, Memory Hierarchy, Types of RAM, Secondary Memory Introduction to Operating Systems, Programming Languages, Program Structure, Linux Shell Commands, Bourne Shell, C Shell, Korn Shell. |
Basic Constructs of C | Keywords, Identifiers, Variables, Symbolic Constants, Data Types and their storage, Operands, Arithmetic Operators, Relational Operators, Logical Operators, Bitwise Operators, Increment & Decrement Operators, Expressions, Conditional Expressions, Assignment Operators and Expressions, Type Conversions, Precedence and Order of Evaluation, External Variables and Scope of Variables. Basic Input Output, Formatted I/O. |
Program Control Flow | Statements and Blocks, Conditional Statements, IF, ELSE-IF, Switch Case statements, Control Loops, For, While and Do-While, Go to and Labels. |
Arrays & Functions | Pointers and Addresses, Arrays, Multi-dimensional arrays, strings, pointer arrays, Functions, Function Prototyping, Scope of functions, Arguments, Call by value and call by references, static variables, recursion, C-Preprocessor and Macros, Command line arguments. |
Structures | Structures, Array of Structures, pointer to structures, Typedef, Unions, Bit fields, passing structures as an argument to functions |
Input and Output | Standard and Formatted Input and Output, File Access & its types, Line Input and Output, Types of Files, Binary & ASCII Files, Error handling, stderr and Exit functions |
Chapters | Topics |
Bending and Torsion | – Stress in beams due to bending, proof of formulae M/I = f/y = E/R and its application to beams of rectangular and circular section. – Application of torsion equation to hollow and solid circular shaft |
Bending moment (B.M.) and Shear force (S.F.) | – Diagrams for cantilevers, simply supported beams with or without overhang and calculation of maximum B.M. and S.F. and the point of contra flexure under the following loads. – Concentrated loads, Uniformly distributed loads over the whole span or part of span, combination of concentrated loads (two or three) and uniformly distributed loads. |
Simple Stress and Strains | – Concept of stress and strain. – Stress and strains in bars subjected to tension and compression, stress-strain diagrams, mechanical properties, factor of safety, Extension of Uniform bar under its own weight, stress produced in compound bars (two or three) due to axial loads. |
Flow Measurement | – Pilot tube, Venturimeter, Orificemeter, Notches (Rectangular & Triangular) and weirs, Rotameter. |
Fluid Dynamics | – Equation of continuity, Euler’s Equation, Bernoulli’s equation, simple applications to one-dimensional flow problems. |
Kinematics Of Fluid Flow | – Types of flow, acceleration in fluid flow, streamlines, stream tubes, irrotational flow, stream function, velocity potential, flow nets. |
Power Cycles | – Carnot and Rankine steam power cycles. – Effect of mean temperature of heat addition on Ranking cycle efficiency. – Otto, Diesel, and Dual combustion cycles for reciprocating I.C. engines. |
Steam and Its Formation | – P-V, P-T, T-S, H-S diagrams of water. – Dryness fraction and its measurement by calorimeter. – Uses of steam tables and Mollier chart (H-S chart). |
Laws of Thermodynamics | – First law of thermodynamics, Steady flow energy equation and its applications (nozzle, throttling device, turbine, compressor, heat exchanger). – Limitations of the first law, statements of the second law by Max-Planck and Clausius, equivalence between the two statements. – Reversible and irreversible processes, Carnot’s theorem. – Energy analysis of a heat engine, refrigerator, and heat pump. |
Chapters | Topics |
Estimation and Costing | – Estimation and Types of estimation – Analysis of Rates – Irrigation Work Estimation – Road Work Estimation and Valuation |
Soil Mechanics | – Physical Properties of soil and Soil classification – Water flow through soil and Soil Deformation – Strength Characteristics of soil and soil Compaction – Bearing Capacity and Site Exploration |
Transportation Engineering | – Road Geometrics – Highway Surveying – Road Material and Pavement – Road Drainage and Maintenance |
Irrigation Engineering | – Rainfall and Run off – Crops water requirement – Irrigation and types of irrigation – Canal Works – Water logging and Drainage – Dams |
Surveying | – Chain & Compass Surveying – Leveling using Dumping and IOP Level |
Steel Structure | – Structural Steel Section and Connections – Tension, Compression, and Beam Members |
Reinforced Concrete Structures | – Reinforcement – Theory of RCC Beams – Bonds in RCC Beams – Singly & Doubly RCC Beams – RCC Slabs – Reinforced Brick Works and Columns |
Concrete and Structures | – Concrete and Properties of Concrete – Formwork, ordinary and special concrete – Concrete Operation – Stress & strain, Bending Moment & Shear Force – Slope and Deflection – Columns and trusses |
Hydraulics | – Fluids and Properties of fluids – Hydrostatic Pressure – fluid flow and measurement through pipe and open channel |
Construction Material and Building Construction | – Rock, Bricks & Tiles – Cement, Lime Timber and paints – Excavation of foundation – Brick Masonry – Stone Masonry – Wall, Mortar & Concrete – Damp-proofing – Doors-windows – Roof, Floors, Stairs, and Building planning |
Chapters | Topics |
Introduction to Engineering Calculations | – Units and dimensions – Conversion of units – Systems of units – Dimensional homogeneity and dimensionless quantities – Conversions involving process variables like pressure, temperature, density/specific gravity, mass, volume, flow rate, and chemical composition – Chemical equations and stoichiometry |
Systematic analysis of chemical processes | – Unit operations and unit processes – Material and energy balances – Thermodynamics – Chemical reaction engineering – Introduction to material balances without chemical reactions – Limiting and excess reactants – Recycle, Bypass, and Purge calculations |
Gas laws and humidity calculations | – P-V-T relations for gas and gas mixtures – Calculations using the ideal gas law – Use of compressibility charts and equations of state (Van der Waals’) to predict real gas properties from experimental data – Vapour pressure calculations – Clausius Clapeyron equation – Saturation vapour pressure – Vapour-liquid equilibrium calculations using Raoult’s law and Henry’s law – Relative humidity, partial saturation, and humidity |
Chapters | Topics |
Mechanics | – Linear kinematics and its equations of motion, projectile motion, circular motion – Newton’s laws of motion, principle of conservation of momentum applications to linear and planar motion, concept of friction and its laws, motion on smooth and rough inclined planes, simple and complex Atwood’s machines – Concept of work, energy, and power, work-energy principle, principle of conservation of energy – Rotational motion, equations of rotational kinematics, moment of inertia and radius of gyration of a rotating body; torque and angular momentum; work, power, and energy in rotational motion, conservation of angular momentum – Simple harmonic motion and its characteristics, energetics of simple harmonic motion, idea of damped and forced oscillations, resonance and its applications – Wave motion and its characteristics, theory of sound propagation, velocity of sound and factors influencing the velocity of sound, Doppler effect in sound, superposition of sound in space (stationary waves) and time (beats), vibrations of air columns and stretched strings. |
Optics | – Geometrical optics, reflection and refraction of light, reflections by spherical mirrors, refraction through lenses, spherical and chromatic aberrations, dispersion and deviation of light through prism, optical microscopes and telescopes – Wave nature of light; interference, Young’s double-slit experiment, Lloyd’s mirror and Fresnel’s biprism techniques for producing interference pattern, interference through thin film, coloring of thin films; diffraction of light through a single slit, Rayleigh’s criteria of resolution, resolving power of optical instruments; concept of polarization, methods of producing polarized light, analysis of polarized light, Doppler effect in light – Laser, its principle, characteristics, and applications |
Heat | – Thermometry, idea of specific heat and heat capacity, latent heats of fusion and vaporization, variation of specific heats of solids, liquids, and gases with temperature, concept of degree of freedom, law of equipartition of energy – Modes of heat transfer (conduction, convection, and radiation); linear, surface, and volume expansion of matter on heating |
Electrodynamics | – Electric field and electric potential, electric dipole and its field, Gauss’ law and its applications; concept of capacitance, energy stored in a capacitor, effect of introducing dielectric and conducting slabs between plates of a capacitor, dielectric constant of material – Current electricity, Kirchoff’s laws and applications, thermal and chemical effects of current, slide wire bridge, potentiometer, ammeter, and voltmeter – Magnetic effects of current, Biot-Savert law and its applications, Lorentz force, moving coil galvanometers; laws of electromagnetic induction, eddy currents and its applications, self and mutual inductance |
Modern Physics | – Blackbody radiation distribution, photoelectric effect, idea of x-ray production, wave-matter duality, and de-Broglie waves, position-momentum uncertainty principle – Crystalline and amorphous solids, basic idea of crystal structures (simple cubic, body-centered cubic, face-centered cubic) and their characteristics, close-packing morphologies, Schottky and Frenkel defects in crystals – Rutherford scattering experiment, Bohr’s model and hydrogen spectrum. Nucleus and its properties (mass, size, binding energy, magnetic and quadruple moments), nuclear forces and its properties, phenomenon of radioactivity and its laws, modes of radioactive decays (α, β, and γ), nuclear fission, and fusion. |
Chapters | Topics |
Atomic structure and periodic table | – Constituents of the Atom, Bohr’s Model of the Atom, Quantum Number and Electronic Energy Levels, Aufbau’s Principle, Pauli’s Exclusion Principle, Hund’s Rule, n + l Rule, Electronic Configuration of Elements (s, p, d Block Elements), Development of Periodic Table- Modern Periodic Law, Long form of Periodic Table, Study of Periodicity in Physical and Chemical Properties with special reference to – Atomic and Ionic Radii, Ionisation Potential, Electron Affinity, Electronegativity, Variation of Effective Nuclear Charge in a Period, Metallic Character |
Fuels | – Definition, Classification, Calorific Value (HCV and LCV) and Numerical Problems on Calorific Value, Combustion of Fuels, Numerical Problems on Combustion, Solid Fuels – Coal and Coke, Liquid Fuels- Petroleum and its Distillation, Cracking, Octane and Cetane Values of Liquid Fuels, Synthetic Petrol, Power Alcohol, Bio-Gas, Nuclear Fuels – Introduction to Fission and Fusion Reactions |
Water | – Demonstration of water resources on Earth using pie chart., Classification of water – soft water and hard water, action of soap on hard water, types of hardness, causes of hardness, units of hardness – mg per liter (mgL-1) and part per million (ppm) and simple numericals, Disadvantages caused by the use of hard water in domestic and boiler feed water. Removal of hardness – Permutit process and Ion-exchange process. Chemical analysis of water for estimation of Total dissolved solids (TDS), Alkalinity of water. Drinking water and characteristics of drinking water. Natural water sterilization by chlorine and UV radiation and reverse osmosis (elementary idea) |
Environmental Chemistry | – Classification of pollutants, the greenhouse effect, toxic heavy metals, organic compounds as environmental pollutants, ozone layer depletion |
Corrosion | – Types of corrosion, dry and wet corrosion and their mechanisms, types of electrochemical corrosion (galvanic, pitting, waterline, differential aeration, soil, microbiological, intergranular, stress corrosion), factors influencing corrosion, prevention of corrosion |
Chapters | Topics |
Algebra | – Quadratic Equations, equations reducible to quadratic form, relation between roots and coefficients – Arithmetic Progression, Geometric Progression, Harmonic Progression, Series of Natural Numbers |
Matrices | – Concept of linear independence and dependence, Rank of a matrix: Row – Echelon form, System of linear equations: Condition for consistency of system of linear equations, Inverse of a matrix |
Trigonometry | – Trigonometric ratios and their relations, ratios of some standard angles, solution of trigonometric equations, sum and difference formulae, product formulae, multiple and sub-multiple angles |
Coordinate Geometry | – Cartesian coordinates, equations of straight line in various forms, intersection of two straight lines, angle between two lines, distance formula. Equation of circle in various forms, tangent and normal to circle |
Differential Calculus of Functions (1 var) | – Successive Differentiation, Leibnitz Theorem, Expansions of functions: Taylor’s and Maclaurin’s Series, Formulae for remainder term in Taylor and Maclaurin series, Angle of contingence, Curvature, Radius of curvature, Centre of curvature for curves in Cartesian form. Curvature at the origin: Newton’s formulas. |
Differential Calculus of Functions (2 var) | – Concept of limit and continuity of a function of two variables, Partial derivatives, total differential, differentiation of an implicit function, chain rule, change of variables, Jacobian, Taylor’s and Maclaurin’s series. Maxima and minima of a function of two variables: Lagrange’s method of multipliers. |
Ordinary Differential Equations | – Review of geometrical meaning of the differential equation directional fields, Exact differential equations, Integrating factors |
Integral Calculus | – Reduction formula for òsinn x dx, òcosnx dx, ò sinm x cosm x dx, Areas of curves, Length of curves, Volume and surface areas of revolution, Double integrals, Change of order of integration, Areas enclosed by plane curves. |
Vector Differential Calculus | – Vectors and scalar functions and fields, derivatives. Curves, tangents, arc lengths, Curvature and torsion of a curve, Gradient of a Scalar field, Directional Derivative, Divergence of a vector field, Curl of a vector field. |
Vector Integral Calculus | – Line integrals, Line integrals independent of path, Green’s theorem in the plane, Surface Integrals, Triple integrals, Gauss Divergence Theorem, Stoke’s Theorem. |
Chapters | Topics |
General Aptitude | – Coding-Decoding – Directions – Reasoning |
Writing Skills | – Basics of Grammar: Word Order, Sentence Construction, Placing of Subject and Verbs – Parts of Speech: Nouns, Pronouns, Adjectives, Verbs, Adverbs, Use of Tenses, Articles, Active-Passive, Verbal Analogies |
Explore the top recommended books to ace the PULEET exam and boost your preparation effectively.
Subject | Book Titles | Authors |
Mechanical Engineering | “Engineering Mechanics” | S. Timoshenko and D.H. Young |
“Fluid Mechanics” | Frank M. White | |
“Thermodynamics: An Engineering Approach” | Yunus A. Çengel and Michael A. Boles | |
“Introduction to Heat Transfer” | Theodore L. Bergman, et al. | |
Civil Engineering | “Estimating and Costing in Civil Engineering” | B.N. Dutta |
“Soil Mechanics and Foundation Engineering” | Dr. K.R. Arora | |
“Highway Engineering” | S.K. Khanna and C.E.G. Justo | |
“Irrigation Engineering and Hydraulic Structures” | Santosh Kumar Garg | |
Chemical Engineering | “Introduction to Chemical Engineering Thermodynamics” | J.M. Smith, H.C. Van Ness, et al. |
“Unit Operations of Chemical Engineering” | Warren L. McCabe, et al. | |
“Chemical Reaction Engineering” | Octave Levenspiel | |
“Principles of Mass Transfer and Separation Processes” | Binay K. Dutta | |
Physics | “Concepts of Physics” | H.C. Verma |
“Fundamentals of Physics” | Halliday, Resnick, and Walker | |
“Problems in General Physics” | I.E. Irodov | |
“Physics for Scientists and Engineers” | Serway and Jewett | |
Mathematics | “Higher Engineering Mathematics” | B.S. Grewal |
“Advanced Engineering Mathematics” | Erwin Kreyszig | |
“Engineering Mathematics” | K.A. Stroud | |
“Higher Engineering Mathematics” | John Bird | |
General Aptitude & Communication Skills | “A Modern Approach to Verbal & Non-Verbal Reasoning” | R.S. Aggarwal |
“Quantitative Aptitude for Competitive Examinations” | R.S. Aggarwal | |
“High School English Grammar & Composition” | Wren & Martin |
Preparing for PULEET requires a systematic approach and dedicated effort. Here are some preparation tips to help you excel in the exam:
The PULEET 2024 admit card will be issued a few days before the exam date. Candidates who have applied for PULEET 2024 can access their admit cards online from the official website puleet.puchd.ac.in. To download the admit card, candidates will require their login details. A direct link to download the admit card will also be provided on this page once it becomes available. The PULEET admit card 2024 is a crucial document necessary for appearing in the exam. Without the admit card, candidates will not be allowed entry into the exam hall.
To download the PULEET 2024 admit card, candidates can follow these steps:
After the PULEET 2024 exam is conducted, the official answer key will be made available online on the official website of Panjab University, Chandigarh. Candidates will be able to download the answer key from the website, and a link for this purpose will be updated on this page for easy access.
The PULEET official answer key 2024 will contain the correct answers to all the questions asked in the exam. This will enable candidates to calculate their scores by comparing their responses with the correct ones provided in the answer key. With the help of the answer key, candidates can determine the number of correct and incorrect responses, and consequently, estimate their rank in the examination.
To download the PULEET (Panjab University Lateral Entry Entrance Test) Answer Key, candidates can follow these steps:
After the PULEET 2024 exam, Panjab University will announce the results shortly thereafter. Candidates can view their results by logging in with their assigned ID and password. We will provide a direct link to access the PULEET 2024 result on this page once it is available.
In case a candidate is dissatisfied with their result, they have the option to verify it. The concerned authority will furnish a copy of the PULEET answer sheet upon payment of Rs 10,000/- within ten days of the result declaration. Furthermore, the office is obligated to complete the entire procedure within three working days.
To check the PULEET (Panjab University Lateral Entry Entrance Test) result, follow these steps:
Counselling for PULEET 2024 is open to candidates who successfully pass the exam and are listed on the rank/merit list. To take part in counselling, candidates must submit the admission form and attend according to the scheduled time. Additionally, candidates must bring all required documents on the counselling day.
During the counselling process for PULEET, candidates are required to present a set of documents for verification. These documents serve as proof of their eligibility and academic qualifications. Here’s a detailed list of the documents typically required at the counselling session:
PULEET facilitates admission to various esteemed engineering institutions in Chandigarh, offering a seamless transition for diploma holders to pursue their Bachelor of Engineering (BE) degree.
Name | Chandigarh College of Engineering and Technology |
Location | Chandigarh |
Ownership | Government |
Courses Offered | 4 Courses |
Exams Accepted | PULEET |
Total Tuition Fees | ₹1.93 L |
Median Salary | ₹5.5 LPA |
Get in touch with the PULEET admission coordinator at Panjab University, Chandigarh, for any inquiries or assistance regarding the entrance test.
Coordinator | PULEET Admission |
Position | Assistant Registrar, CET Cell |
Institution | Panjab University |
Address | Sector 14, Chandigarh – 160 014 |
puleet@pu.ac.in |
The Panjab University Lateral Engineering Entrance Test (PULEET) serves as a gateway for aspiring engineers to secure admission into the second year of the Bachelor of Engineering (BE) program at Panjab University, Chandigarh. With its rigorous examination process and comprehensive syllabus covering various engineering fundamentals, PULEET ensures that candidates possess the necessary knowledge and skills to excel in their academic pursuits.
The exam’s popularity and significance are evidenced by the increasing number of applicants each year, reflecting the aspirants’ keen interest in pursuing engineering studies at a prestigious institution like Panjab University. As PULEET continues to uphold its standards of excellence and fairness in the admission process, it remains a crucial milestone for engineering aspirants seeking to embark on a fulfilling educational journey and build a successful career in the field of engineering.
For any queries regarding above topic, please tell us through below comment session.